When I first bought my Miata it became painfully clear that most other bigger cars on the road are on the mission to kill me. Multiple times I found myself taking defensive action to avoid a pick up truck or an SUV veering into my lane, completely oblivious that I was there. My solution was to buy a dash cam so at least I would have evidence when someone runs me off the road. My buddy Bill instead opted to get a louder horn.
Today we went ahead and installed his Thompson Engineering sourced horn. The Tornado/Marco labelled model (Made in Italy) it says… looks a lot more bulkier than the puny stock horn. It was a quick and easy bolt on once we go to it by unbolting a whole bunch of plastic that packages the bumper area of the Miata nicely. At one point I was excited and a little bit worried we will have to take the whole front bumper off. But apparently there are 80+ fastening points one must remove, and I’m glad we didn’t have to resort to that. Nevertheless there were quite a few 8mm screws, 10mm screws and a bunch of plastic fasteners that had to be loosened to get to the horn.
Here’s some pix:
Bill bought the louder horn from Thompson Engineering. The kit came complete with the horn, several fuses, and all the mounting brackets, which was very easy to assemble. We made a trip to Lowe’s to pick up about 5 feet of quarter inch hose in order to route the air intake for the horn under the hood. Lots of zip ties were used to package everything nicely and it looked very factory in the end.