Tag Archives: miata fender

Mazda MX-5: Miata Fender Removal. Fender Bender Fix.

Well I’ve gone and done it. Took the better part of the day but my fender is now fixed. Not the prettiest job but it will have to do for now.

What I’ve learned is that it is possible to change the fender without removing the bumper. I was worried it would take forever. Luckily it didn’t take as long as I thought it would, the most time consuming bit was trying to find the plastic clips that hold the fender liner in place. I picked up some universal Dorman fasteners which don’t sit perfectly but again they’ll have to do. Despite my best efforts most of mine broke even though I was perfectly gentle, I guess after 11 years they get so brittle there’s no way to reuse them.

Another difficulty was getting the side skirt removed enough to get to the bottom bolts. Lucky I didn’t break those clips, universal wouldn’t have been an option, dealer only part.

And finally the new fender I got was somewhat bowed. It took a lot of time to bang it into shape. And even then there are rather large gaps between fender and bumper and fender and hood.

Here’s some photos:

So, in this process I used zip ties and hundred mile per hour (100mph) tape… like in NASCAR (lol) or more commonly known as Flex Tape available from TV in As Seen On TV ads or in my case picked up at Walgreens for $12.99 (4” inches wide 5’ feet long) I used a fraction of it on the cracked bits on the inside of the bumper so that the fender liner has something to attach to. And on the fender headlight bit which cracked off in the accident. The same bit was meant to be screwed into the fender, but for the life of me I could not align it, so I zip tied the damn thing in place. If I took the front bumper off I probably would have been able to tighten it correctly. For now zip ties and tape will do. Going to go for a spirited drive to see if anything loose shakes out. As of now everything is attached tightly. I did scuff up some paint on the car from the sharp metal of the fender, not to mention murdered my hands with cuts and scrapes.

Mazda MX-5: Hunt for Miata Fender in Copper Red (Found It!)

It’s been a week since my mom had a fender bender with my car… (she bent the fender with her car while backing up). Since then I’ve been scouring the Internets for a replacement. Nothing terribly close could be found I called about a dozen local used car part places, but I had two candidates via a web site called Car-Part.com

eBay was crazy pricey. Craigslist had nothing. Car-Part.com however had a ton of options. But because I didn’t want a repaint I decided to stick to Copper Red paint code 32V. First option on Long Island about 69 miles away. And second in Pennsylvania near Wilkes Barre 98 miles away. I emailed both places. Got some photos of close ups of damage. And chose the cheapest less damaged option, $100 bux. Not perfect, but I think it will clean up nicely.

The car on Long Island.

And the car in Pennsylvania:

There were many options all around the East Coast, in a variety of colors:

Like this green PRHT at the same place on Long Island, though I did not see it:

This one looks great, except for the scratches on top right of the pic.

Also with interesting interior, a lot less pumpkin color like in my car. I like this two tone with black highlights. Center console.

Love the look of the Niseko car available in Pennsylvania at yet another wrecker.

Always been a fan of this color, beautiful wheels on it too.

This afternoon I headed East to Medford, NY Thinking all the while that I bought my car on Long Island. Bought the RX-8 spare donut for my car there. And now the fender in the middle of Long Island just shy of the Hamptons, near Haupague and Lake Ronkonkoma. The place was only 69 miles away, but it freaking took me 8 hours round trip $11 in tolls and $20 in fuel, because of Friday traffic and the fact I drove thru NYC trying to cheap out on the tolls.

Medford seems to have a whole row of junk yards along Peconia Ave, among them where I bought my fender today. Reminds me of the chop shops along Avenue P in Newark, NJ

Nice wheels…

It’s not perfect, but it will do.

Since the ad was posted, looks like a bunch of parts were sold already.

This little nipple in the middle of the damn thing will really bother me. Could not see it in pics because of the glue residue  but what can you do. Will have to live with it.

My dog Maxi Max came along for the ride. We stopped in Flushing, the Chinatown of Queens for my favorite soup dumplings from Joe’s Shanghai. And then again at Kababish near La Guardia airport because of heavy bumper to bumper traffic, and because this place was highly recommended by a coworker, so I had to try it. Max helped himself to a piece of chicken kebab while I was out of the car getting gas. He got smacked for stealing, but when we got home he drank the whole bowl of water. The food was punishment enough because it was so spicy….

Anyway, tomorrow I’ll attempt to install it.