Tag Archives: rolex

Rolex 24 hours at Daytona the debrief

Endurance racing is my favorite form of Motorsport. This year’s Rolex 24 had the potential to be very special because in the middle of last season one of my Canadian colleagues put me in touch with an IMSA official and a prospect of a real job (even if it was on a part-time basis) to work events that I really love as a race official. I had my fingers and toes crossed even as December rolled around but the job did not materialize… The 2018 season though seemed to be off to an exciting start with lots of “new” cars/teams/drivers joining the series, so I scrambled to book my flights and went as a volunteer instead.

For the race I got my pit lane assignment directly across from folks whose team I was hoping to join. But instead of doing something important with a real impact on the competition, I spent five days trackside spectating. It was excellent entertainment being so close until the race rolled around when it became pretty obvious that much of the previous year will repeat itself and Cadillacs will dominate. The excitement wore off.

The most interesting racing was in the GT Daytona field so I paid special attention to that battle. In prototypes the lead car was several laps ahead of second place at one point. And in GT Le Mans Fords ran away with pace Corvette couldn’t match, they too were several laps ahead. It was sad to watch the BMW M8’s be so uncompetitive. And the Porsche RSR team didn’t seem to have it’s kamikaze pilots from last year. Oh well!

At the end of the race records were broken, champions were crowned, and Rolex watches handed out as prizes. Who cares though? The predictability of the outcome made things boring. Hey, at least the weather was good!

Luckily, the 24h wasn’t the only race of the weekend. I feel like I got my money’s worth going on this trip from the two support series. The Ferrari Challenge folks put on a grand battle, and with 40+ cars on the grid it was awesome to see the series alive and well after seeing it’s sorry state in Connecticut last time I volunteered for it at Lime Rock.

Similarly Continental Tire Challenge rocked! I loved the battles there in all the classes. Nice to see TC R cars slide in so well into the grid, though a little sad not to see Miatas in ST class.

So in conclusion it was a good trip for a good clean race. A bit disapointing because of lack of excitement but I departed satisfied. And since I’m having trouble finding paid work, it’s likely this event will be one of my last times volunteering until I get the means to afford it again in the future. Too bad I wasn’t good enough to be hired by the series so I could continue doing what I really like to do, but such is life…

Wanna buy a Race Car? SpeedSource Goes Belly Up Grand Am & IMSA Mazda’s and Equipment Auction

Another famous race team has gone belly up… and now’s your lucky chance to buy a race car at auction “probably” for less money than it would cost to get one built! The online auction will run December 19 by Key Auctioneers: click here. Get yourself a gift for the holidays… Merry Christmas!

Thanks to Marshall Pruett from Racer.com for sharing the news on facebook. It sucks for SpeedSource to close it’s doors, especially for the team of people that make that place run. But having seen a few of their employees at the HSR event in Daytona last month, I think many of them will do just fine. It wasn’t that long ago that SpeedSource was hiring people… imagine some desperate schmuck like me spending all the money he’s got left to move to Florida for a job that went “poof!” in just a few months. That would of been nuts.

But it’s a good time to be rich in America. And some of the bargains available at this auction will surely end up at the race track near you. I am surprised that Mazda North American Operations hasn’t snagged the two P2 race cars… or the tube frame diesel Mazda6’s… but maybe the auctioneers have a higher reserve than they’re willing to part with. Still I think this is great opportunity for someone:

Photo credit: Key Auctioneers
Photo credit: Key Auctioneers
Photo credit: Key Auctioneers
Photo credit: Key Auctioneers
Photo credit: Key Auctioneers
Photo credit: Key Auctioneers

I can’t believe they kept the crew guy’s shoes and are now selling them in used condition… who’d buy this?

Photo credit: Key Auctioneers

And the auction list:  http://www.keyauctioneers.com/2017/12/19/171219speedsource/

On-Site Auction and Online Bidding – Rings 1 & 2: Tuesday, December 19 at 10:00am
Online Only Bidding – Ring 3 (soft close): 
Tuesday, December 19 at 12:00pm
Preview: 
Monday, December 18 from 10:00am – 2:00pm
Removal: 
Wednesday, December 20 & Thursday, December 21 from 8:00am – 4:00pm
               *Note: No Removal Will Occur the Day of the Auction
Auction Address: 4150 NW 120th Avenue, Coral Springs, Florida 33065

Join us on December 19th as we offer surplus rolling stock, equipment and parts from SpeedSource. This is the end of the year event you won’t want to miss! 

Race Cars
2013 Mazda6 GX, Speedsource/Riley Chassis No. 012, Red & Black Color Scheme (Engine included)
2013 Mazda6 GX, Speedsource/Riley Chassis No. 004, Yellow & Orange Color Scheme (No Engine)
Mazda6 GX, Speedsource/Riley Chassis, Matte Black Color (No Engine)
Lola Cars Chassis No. MM07 (No Engine), has run in the IMSA
Lola Cars Chassis No. HU06 (No Engine), has LM24 history as Ex Status GP car and IMSA

Rolling Stock
2010 Ez-Go Golf Cart, Gas, Roof, Upgraded Wheels & Tires, Rain Cover, Rear Seats fold out flat
Taylor-Dunn Flatbed Utility Cart, Fold-up Seat, Upgraded Wheel & Tires, LED headlights
2002 JLG Scissor Lift w/ Extendable Platform
Clarke Focus II Floor Cleaner w/ built-in smart battery charger

Garage & Pit Equipment
(2) Caseliner Fiberglass LED Powerhoods, w/ Flight Case, Mounting Pole & Power Cables
Caseliner LED Sign/Timing Board w/ Flight Case, Tripod, Cables & Cover
Display Truss System w/ enough equipment for 2 cars
Stainless Steel Bodywork Carts
Caseliner Foam Boards with Flight Cases and Aluminum Poles
(2) Breda Racing Air Jacks, Model: 500/600, Mfg Year: 2017
(4) Arnold Machining Air Jacks, 100 psi
(2) CAMOZI Air Jacks
Robinair Refrigerant Recovery, Recycling & Recharging Station, Model: 34988, Mfg. Date: 08/16
Airflow Systems Exhaust Extractors, Model: VES3 Portable
The Hot Setup Engine Water Heater
Longacre Scale Set with ComputerScales DX Electronic Chassis Scale, (4) Scale Pads, Monitor, Wiring & Cart
(2) Longacre Turn Plates
Longacre Digital Tire Pressure Gauges
Intercomp Temperature Gun
Longacre Tire Pyrometer
Krontec Lances
Satubli Dump Jugs w/ SS Stands & Probe Covers
ATL & Jazz Dump Jugs
AC Hydraulic Engine Hoist, Capacity: 2,200 lbs., Collapsible
Paoli Dive Tank Set
LISTA, CTECH and Assorted Tool Chests
Pneumatic Pit Guns
Milwaukee M18 Impact Guns
Cabinets FULL of Aerospace Grade Hardware, Electrical Components, Fittings, Plugs, etc.
Port-a-Cool 60” Fans, Drum Fans, Folding Tables, Nitrogen Bottle Cages, Torque Wrenches, Heat Guns, Testers, Tap & Die sets, Crimpers, Borescope kit, etc.

Shop & Fabrication Equipment
Sunnen Precision Honing Machine, Model: LBB-1699
Chassis Setup Plate, 8’ x 20’
Elevated Chassis Setup Plate, 6’ x 14’
Eastern Precision Ultrasonic Parts Cleaner
HYD-MECH Horizontal Band Saw, Model: S-20M, S/N: 6C11111260
(2) Enco Vertical Bandsaws, Model: 01712009
Dake Cold Saw, Model: 315-1PH
Birmingham Lathe
Miller Syncrowave250 DX TIG Welder
Miller Millermatic150 MIG Welder
(2) Bridgeport Mills w/ Digital Readout Controls
(2) Drill Presses, Baleigh & Ryobi
Cyclone Sandblasting Cabinet, Model: 3824
Pro-Tools Electric Bead Roller on Stand
Pexto Shear, Model: 152K, Capacity: 18 Ga.
Pexto Shear
Enco 50” Slip Roll, Model: 130-5501, Capacity: 16 Ga., Mfg Year: 2005
ProFormer Manual Break, Capacity: 16 Ga.
Manual Break, 48”, Capacity: 16 Ga.
Dake Arbor Press, No. 1 ½
Beverly Throatless Shear, Model: B2
Conquest Disc Grinder/Sander, Model: 20ARCH, 3 PH
NORCO 2-Ton Shop Press
Dewalt Cutoff Saw, Makita Cutoff Saw, Pedestal Grinders, Disc Sander, Horizonal Boring Drill on Stand, Clamps, Vises, Slide Hammer Puller Set, Gas/Acetylene Welding Carts, Torch Gauge Sets, Welding Hoses, Welding Helmets, Welding Tables, Butcher Block Top Shop Tables, Parts Organizers, Ladders, Rolling Tool Cabinets, etc.

Inspection & Test Equipment
Dynojet Dynamometer w/ CPU, Electronics and Cart
Engine Dynamometer w/ Superflow Controls and Electronics
DCM Magnetic Particle Checker, Model: MPI 3062, S/N: 35101, 1 PH/230 Volt
ASNL Injector Tester, Capacity: 8 Injectors
FaroArm Platinum CMM Inspection Arm, Length: 8’, Mfg. Year: 2010, S/N: P08-05-10-08515
Kwik Mark Dot Peen Marking Machine, Model: KM-64
Rockwell Hardness Tester
Height Gauges, Assorted Testers, Micrometers, Digital Protractors, Laser Levels, etc.

Race Accessories, Radio Equipment & Hospitality
Race Car Simulator, approx. 6’ x 2.5’, includes: Ultra CPU Tower, Logitech Surround Sound System, ProCar by Scott Race Seat, Panasonic Flatscreen TV,
Crew Helmets, assorted types (25+)
Crew & Driver Shoes, New Balance
Moto Sport Goggles, Oakley & Scott
Sparco Fire Resistant Under Garments; head socks, shirts, long underwear, socks
Grizzly & Coleman Coolers
Pop-up Tents, various sizes
Folding Chairs
Folding Tables
Catering Equipment
Glass Door Display Coolers
Poly-Flooring (1,000’s of Square Feet in various colors)
Retractable Rope Dividers
Kenwood NX300 Radios (30+), Batteries, Charging Banks, Headsets
RCI Headsets w/ Bluetooth & Dual Radio Ports (15+)
Kenwood TK Radios (8+)
Radius GR1225 Repeater Unit with Travel Case, Antennas and Wires
Car Radio Harnesses

 

Key Terms
Full Payment is Due at the Conclusion of the Auction.
Accepted Forms of Payment:  Cash, VISA, MasterCard, American Express, Discover, Wire Transfer
A check will ONLY be accepted with a Bank Letter of Guarantee
12% Buyers Premium Will be Collected for on-site Buyers, 18% for Online Buyers
Complete Terms can be found under the documents tab.
License Information: AB3686; Seth Seaton AU4902
Seller: SpeedSource, Inc.

*Shipping for this auction will not be provided by Key Auctioneers. Key Auctioneers will gladly facilitate shipping with third party moving/shipping companies.