Tag Archives: rx8

Mazda MX-5: Miata Shopping in Canada: Montréal, Québec

I failed once again to meet any local Miata owners in Québec on my visit to Canada for the Formula E events on the streets of Montréal. Can’t say I was surprised. After all I had failed to meet any Miata owners on my previous trips to Mosport, Ontario as well. Just like on the last trip to Bowmanville I also failed to see a Canadian-spec Miata at the local dealership in Montreal as well.

However, I was very much impressed with the Amount of Mazda dealers in the greater Montreal metropolitan area and there surely are plenty of Mazda’s on the streets of the city… they just aren’t the little Roadsters. So here are some pix from my experience.

The closest dealer with easy public transport system access was Mazda Gabriel St-Jacques… I took the Metro, walked over to where it should have been, didn’t see it and walked around the block lost between a highway and a hospital. But on the second pass I found it! Lots of construction on the streets of Montreal, the orange flowers (orange cones) are in full bloom this summer!

At first… no Miata’s to be seen on the lot!

Oh putain…

But that’s no different from the Mazda dealer I visited in Ontario. So I went in to have a chat with the staff and see if I can get a Canadian-spec Miata brochure at least… surprise! they didn’t have any. The receptionist managed to find a 2016 spec sheet, and sent me on my way. I also visited their parts department to inquire about the Canadian-spec window washer fluid bottle, which is a different design, and much bigger than the American-spec. They didn’t have any in stock… no surprise there. But they could order one for $137 bux… YIKES! However, a stripped down version without a motor (which could be transferred over from the original on the car) was only $66 CAD… phew!

The staff were super helpful it’s just a shame there wasn’t any Miata’s on the lot I could sit in and look around.

I remember reading a Miata.net post that complained: Do they want to sell cars or not? It appears if you want to buy a Miata in Canada it’s a long term process with possible multiple visits to the dealership, ordering and waiting for the car to arrive.

I was so focused on looking for a new ND on the lot that somehow I missed this colorful combination of used-Mazda’s a yellow RX-8 which is probably my favorite color for this rotary car and a red NB… How do you miss something so bright? Glad I spotted them on the way out of the dealership.

Initially I didn’t even see any Miata’s on the streets of Montreal… but then I was proven wrong Thursday night where I spotted half-a-dozen, mostly NB’s in all different colors roaming around downtown Montreal… I suspect they drove in from the suburbs to get a front row view of the fireworks that were scheduled to start after dark on that night. The next day I saw a beautiful NC3 PRHT in white with the top down that came up behind me and left too quick for me to snap a shot of it. Here’s a few Miata’s I did spot on the streets of Old Montreal:

Ironically there were far more Porsche’s on the streets of Montreal than Miata’s.

I even spotted a right-hand-drive Nissan Figaro… twice!

Anyway… while the Miata community of Quebec is very hard to spot, other Mazda’s are all over the place. Tons of CX-5’s and Mazda3’s roaming around. Even used for official city business:

The older Mazda’s make it seem obvious why people hide their precious Roadsters… the rust isn’t kind in this part of the world:

I suspect the salt use in the winter eats right through the metal.

Anyway, I had such a blast in Montreal for the Formula E event even though I completely failed to make any contact with the local Miata community… and I even researched several Quebec MX-5 Clubs and sent them facebook messages asking for help.

Maybe I’ll get more lucky in the future…

Mazda Car Wash Day and Detail Clinic

This weekend Chris hosted a car wash & detail clinic day.

I joked that I was preparing for this day by not washing my car for at least two weeks… and several road trips on some rainy days for Motorsport events like the visits to Lime Rock. But in reality every time I do wash my car it seems to rain the next day messing things up. All the pollen in the air, the dust, and it’s a pain in the ass to keep the car clean. I don’t think I’ve ever actually detailed my car, until this weekend!

Chris has a collection of various detailing products that were put to a good use. One of my favorites was the one that turned my headlights that have started to get cloudy to bright and clear again.

Some pix:

This yellow RX-8 was my favorite Mazda at the event… I love the color. I think my next MX-5 will be some shade of yellow!

Yea, please don’t suck Mazda!

Good to see Bill show up with his 2007 GT soft top… I think in the past I’ve assumed it was the first model year NC but I was wrong.

Isn’t that yellow gorgeous?

My turn…

Tackling the headlights…

This is what they looked like before, very cloudy on top…

and this is what they look like after:

as compared to Bill’s car:

and compared to Chris’s car:

and even without washing or detailing Chris’s car looked the best:

To end the day we had the bright idea of attempting to adjust Bill’s new Tokico’s… and then Chris dropped one of the brace nuts into the engine bay… that was the last time we saw it. Even though a lot of time was spent looking for it, it was never found. Luckily the Advance Auto nearby stocked just the right size bright and shiny new ones which I went to pick up to finish the job.

It was a great and very educational day…

Thanks Chris!

Mazda DPi looks like a real production Mazda the 1st Gen Mazda RX-8

I made a post a while back wishing prototypes looked more like production cars (e.g. Mercedes-Benz CLK-GTR, Porsche 911 GT1, McLaren F1 GTR). I think this year’s Mazda DPi platform came fairly close at resembling a production Mazda… though you have to squint just right to see that resemblance.

I think, and I could be wrong, but to me the current SpeedSource Mazda RT24-P looks a lot like the 1st Generation Mazda RX-8 especially the very early models of 2003-2008 vintage.

Just look at it:

And compare it to this picachu yellow RX-8:

To me, the narrow grille, the almond shaped headlights, the big wheel arches and even the fog light openings all resemble one another on the new prototype and the old street car.

Granted there are plenty of differences, like the fact the RX-8 was Rotary powered being the most obvious. And the fact that few things about the MRT24-P (besides the sponsorship money of course) actually come from Mazda Motors, the car was built by Multimatic in Canada, the same company that builds both the race and the street versions of the Ford GT for Ford Motor Company, engines are AER, etc. Still I would say they did a great job creating a vehicle that at first look does resemble a real Mazda! This is obviously not the case with the Cadillac DPi’s for example, or even the Tequila Patron Nissans (although they did a great job modifying a nose of the Ligier to look very Nissan-like).

Way to go Mazda!

Mazda MX-5: Oil Change at 5,000 miles with Pennzoil Platinum 0W20 and K&N Filter HP-1002

Update: (Feb 2017) I wasn’t sure what was causing the car to act weird after this maintenance session at Chris’s house. Now that some time and mileage have passed I think I figured it out. And the result is a few issues. 1). part of the problem was the fact we overfilled the transmission fluid during the flush. There was an issue we found with proper checking of the level (which required running the car to get it warm, and then opening the check valve). 2). my car doesn’t seem to like 0W20 weight oil. I posted a few times that I don’t like Mobil 1 and now I can add Pennzoil Platinum 0W20 to the list. Both Mobil 1 and Pennzoil Platinum 0W20 turned real dark at just about 5k miles which shouldn’t happen. This makes me believe I should totally stick to 5W20 from now on. I’ve changed out the Pennzoil from this post with Castrol EDGE 5W20 and car feels absolutely perfect!


I don’t think I’ve ever had an oil change party with friends until this weekend, where my buddy Chris with a 2008 Silver NC1 GT PRHT offered to help me flush most of the fluids on my car while performing the same service on a bunch of cars in his household.

The plan was to flush the power steering fluid and fill it fresh with Mobil 1 ATF. Flush the Automatic transmission fluid with Pennzoil Platinum High Mileage ATF, and finally change my oil with Pennzoil Platinum 0W20 that I’ve had sitting at my home since about this time last year when I got the crazy deal from Advance Auto on two sets of oils (one 5W20 which I used up during spring, followed by two more Pennzoil Platinum 5W20 changes that I bought during the summer and now for the winter decided to go with thinner 0W20).

I’ll make separate posts for each maintenance item, so click on whatever interests you most:

I must admit that after doing all these fluid changes the car feels a bit weird and I can’t really pin point what the issue is. I’m sure it is fluid related because there’s a faint drone coming from either the engine or the transmission. Note to self: next time do one fluid flush at a time so if there is an issue like this it is easier to narrow down.

But back to the oil change party at Chris’s house.

The day started with a trip to the Subaru dealership to pick up an oil filter for his XV… then Chris changed his ’08 NC’s oil using Castrol Edge 5W20 Extended which I’d like to try in my car at some point in the future once Pennzoil stops being so cheap with all of their promos. While Chris’s brother Eric did an oil change on his Mazda RX-8 Rotary with Castrol Edge 10W30.

My car was last and oil was basically the last thing we did to it, but since it was the easiest job I’ll write about it first.

I was curious to see how Chris does his oil changes and for someone so meticulous as he is, he does it very differently than I do. He jacks the front, keeps the oil cap on, undoes the drain plug, the filter, and re-installs the drain plug with a new bolt that I picked up at a local Mazda dealer for $7.99 accompanied with a $1.65 crush washer. In all the oil changes I’ve done to my car to date I never changed the nut and the washer, but since Chris was doing my car for me, I had him do the same thing he does to his car, so mine also received the new bolt and crush washer. I typically jack the car up and put it on jack stands and when the fluid drains, I lower the passenger side so more of the dirty oil comes out. Chris doesn’t do that himself, which I found to be pretty interesting. Chris was surprised that his car took more Castrol Edge oil than it normally does using Mobil 1 oil which he has used in the past. Mine took the standard amount of Pennzoil that I typically use, which is just above 4.5 QT.

Some pix from the day:

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-0

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-16

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-17

My supplies, Pennzoil Platinum 0W20, new Mazda bolts and washers and a K&N HP-1002 filter.


pennzoil-platinum-0w20-oil-change-at-chris-booth-house-7

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-8

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-20

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-21

Chris’s supplies Castrol Edge 5W20 Extended Performance oil with Mobil 1 M1-102 filter.


pennzoil-platinum-0w20-oil-change-at-chris-booth-house-12

Eric’s choice: Castrol Edge 10W30 Extended Performance oil.

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-11

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-10

Seeing the RX-8 up close and personal made me appreciate that car a bit more, it’s surprising how massive it is compared to the Miata

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-9

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-13

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-22

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-23

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-25

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-24

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-26

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-27

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-28

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-19

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-18

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-15

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-14

Also pretty incredible how tiny yet thirsty the Rotary engine is.

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-3

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-6

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-1

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-2

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-4

pennzoil-platinum-0w20-oil-change-at-chris-booth-house-5

It felt good to finish up the day with the easiest job of the evening, the oil change… (which happened around midnight… Yikes!)

Now if only I could figure out why is my engine running louder on 0W20 compared to 5W20 and why there’s this faint shimmy going on that I could feel at highway speed which seems to come from the front of the car, around the engine area. (or possible the trans).

Click here to read about the tranny fluid flush or here for power steering fluid flush.