Tag Archives: timken

Mazda MX-5 Miata Front Wheel Bearings Replacement

This week I took on a project that totally kicked my ass, mentally and physically. My friend Bill started experiencing a grinding sound and wheel vibration on the right side of the car after having new wheels installed. Since he gave me his old used tires I went on a test drive with him after COSTCO did his tire install and quickly diagnosed it as a broken wheel bearing. Fast forward to Saturday Bill and I attempted to do the replacement of his 111k mile MX5 hubs to new Timken RX8 hubs from Rock Auto.

I did the same job on my car a few years ago. It was tough but I got it done in an afternoon. http://myroadtrip.net/2007-mazda-mx-5-miata-grand-touring-prht/rx-8-front-wheel-bearing-hubs-timken-ha590360-oem-f189-33-04x/

Bills hubs however took much longer and a ton more effort because of rust and the hubs were seized to the base they bolt in to. So over the course of the next four days I kept on spraying the hubs with PB Blaster repeatedly, used up a big bottle of that, not to mention a couple of more CRC degreaser I borrowed from my dad, and pounded the shit out of them using a rented slide hammer from Auto Zone.

On Monday the left side gave way. But the right side, the actual broken bearing would not budge for two more days. Bill researched a few suggestions on the forums. I tried them all and they all failed:

  1. Using a stubby screwdriver to pound from the inside the wheelwell around the plastic ABS cover. Nope!
  2. Pounding the plastic ABS cover, breaking it and hitting the bearing directly. Nope!
  3. Going to Home Depot to buy longer bolts and banging them from the inside to push the hub out. Nope! The bolts sheared immediately and went right thru the hole like thru butter… Argh!

What finally worked was banging from the inside behid the wheel studs to push the thing ever so slightly. I used a chizel on one side because the metal brake duct was very much in the way. Plus more banging with the slide hammer of course. Eventually that worked millimeter by millimeter. A few times I hammered the hub back in place from the front just to move it back and forth, and after a total of maybe 12 or 14 hours of banging over 4 days it worked. Reassembly was very quick maybe half an hour. But after all that banging every bone in my body, every muscle, every cell hurt!

What a project!

Mazda MX-5: Wheel Bearing Hub Replacement with RX-8 (F189 33 04X) Timken Part#: HA590360

Today’s project involved replacing the stock MX-5 front wheel bearing hubs with an upgraded RX-8 hub from Timken part #: HA590360 (OEM part #: F189 33 04X which is ironically stamped on the back of the Timken product along with a Mazda logo – mind you there was no Mazda logos on the original hubs I took off the car). And it’s all thanks to fucking Detroit… and Jessie who diagnosed the problem simply by hearing the symptoms.

So long story short I went to volunteer for Detroit Belle Isle Grand Prix completely forgetting how fucked the roads are in Michigan. Some of the pot holes I hit on this trip were teeth clenching and made me curse myself out for doing it. I love Detroit, but it’s a city you fly into and rent a car and not destroy your personal one. Lesson learned $206 dollars later. I was lucky enough to find a deal through RockAuto.com who was selling the Timken parts for a good 3rd less than the competition. Plus I found a 5% coupon online and there was no tax, with free shipping having the part arrive the day after I ordered it. How cool?!

I was volunteering in Pennsylvania the day the part arrived, doing my first IndyCar event at Pocono Raceway, and driving there confirmed something was amiss as the front end of the car was making some humming noise. It wasn’t terrible. There was no vibration that was annoying, but it was in the background.

Today I stopped by AutoZone to rent some tools I’d need for this job including a slide hammer and a torque wrench (which was broken) all in $120 dollars deposit, which I got back upon returning the tools a few hours later. I also stopped at Lowe’s home improvement store to pick up some Loctite blue thread locker in addition to the anti-seize I picked up at AutoZone with the tools.

The job was fairly straightforward. There was no videos to watch on YouTube of someone else having done this, and frankly I wasn’t really going to do it myself because I lack the technical experience to do the job. But it was simple. Few things went along stubbornly but otherwise it was a quick job. I took a shit ton of pictures of most of the process which I’ll share below.

Unlike the right hub being bad, it turns out that the bearing in the left hub was damaged. It was making some noise when turning right especially so you can see how I was tricked. But I think the failure was at the very early stages because everything felt pretty tight on the car when I tried to diagnose it (besides hearing the noise).

I did both sides simultaneously so it went along pretty quickly.

I’ll let the pictures tell the story:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 52

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 53

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 54

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 55

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 56

Notice how the Timken product has Mazda stamped on it with the OEM part number on the back of the plastic ABS sensor cover.

I still can’t believe this box arrived by FedEx in one day!

mazda mx-5 miata rx-8 wheel bearing hub replacement with timken 1

Beautiful day to tinker with the car!

mazda mx-5 miata rx-8 wheel bearing hub replacement with timken 2

mazda mx-5 miata rx-8 wheel bearing hub replacement with timken 3

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 3

First order of business was to spray every bolt and nut with CRC degreaser… that stuff works like magic!

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 4

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 5

After I sprayed everything I went to the store to pick up my AutoZone rental tools for the job… $120 deposit later, they’re here:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 6

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 7

Notice that the slide hammer and the axle puller are separate parts.

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 8

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 9

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 10

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 11

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 12

Then started spraying the CRC some more, and more… the screws holding the rotors/disks on were a pain to get going!

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 13

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 14

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 15

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 16

A couple of angry yanks on the slide hammer and the hub popped out, this was actually the easy part!

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 17

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 18

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 19

And the other side:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 20

Comparing the OEM MX-5 hub on the right with Timken RX-8 hub on the left side… similar but there are obvious differences like that dimple in the center of the RX-8 hub.

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 21

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 22

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 23

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 24

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 25

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 26

I used some plastic baggies I had laying around to cover up the ABS sensor which was the first thing I unbolted in this job.

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 27

The old hubs:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 28

Another side by side between MX-5 and RX-8 hubs:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 29

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 30

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 31

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 32

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 33

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 34

Time to lube them with anti-seize and do the easy work, installing the new part:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 35

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 36

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 37

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 38

Perfect fit, and so much easier to install then uninstall:

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 39

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 40

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 41

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 42

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 43

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 44

I dabbed Loctite thread locker on every bolt I put back in.

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 45

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 46

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 47

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 48

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 49

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 50

Job done… took the car on a test drive on the way back to AutoZone to return the rental tools. Sounds so much better! And feels tighter too. I thought the car wasn’t loose to begin with but now the steering is much much tighter than when it was with the shot bearing. Very happy with this install and will get to try it out on my next road trip to VIR in a couple of days. I hope the gas mileage improves because lately it had dropped from 34mpg I typically got going to Watkins Glen to just about 31mpg. That’s a big difference!

mazda mx-5 miata rx-8 wheel bearing hub replacement with timkin 51